QUANTEC® PL-400 is a specially formulated plasticizing admixture using the latest dispersant technologies on the market. QUANTEC® PL-400 is designed for use in the manufacture of machine produced concrete products where the process requires zero or very low slump concrete. QUANTEC® PL-400 is supplied as a ready-to-use liquid.
- Increased strength
- Faster cycle times
- Reduced cracking and crazing
- Increased density
- Lower absorption
QUANTEC® PL-400 may be used in all zero or low slump concrete to increase workability while retaining cohesiveness. QUANTEC® PL-400 is intended for use in concrete block mixes, but it is also beneficial if used in concrete pipe, concrete pavers, concrete tile and concrete brick. The increased workability provided by QUANTEC® PL-400 allows for better compaction of the concrete with less cracking and crazing and sharper corners and edges, resulting in fewer culls. Production can be increased, absorption reduced, and appearance and surface characteristics greatly improved.
QUANTEC® PL-400 is a dispersing agent designed to provide a modest swipe finish. By dispersing the cement and aggregate fines, it improves the workability of the mix. Dispersion of the cement results in more complete hydration, and consequently, greater strength for any given cement content.
QUANTEC® PL-400 is compatible with other admixtures, but when multiple admixtures are used they must be added separately to the mix.
QUANTEC® PL-400 is generally used at a rate of 2–6 fl oz/100 lb (130–390 mL/100 kg) of cementitious materials. The addition rate is dependent upon the specific set of materials and the desired end properties.
QUANTEC® PL-400 is typically added separately to the mix either on prewetted aggregates or after the addition of the final mix water. Once QUANTEC® PL-400 is batched, it should be mixed for a minimum of one minute, but preferably two minutes. Never add QUANTEC® PL-400 to dry cement. Testing with local materials and production equipment is necessary to determine the end results.
A complete line of admixture dispensing equipment is available.
QUANTEC® PL-400 is available in 55 U.S. gallon (208 L) drums and 275 U.S. gallon (1,040 L) returnable totes.
Health & Safety
All precautions defined on the SDS (Safety Data Sheet) for QUANTEC® PL-400 must be followed.
QUANTEC® PL-400 will begin to freeze at approximately 32°F (0°C), but will return to full strength after thawing and thorough agitation. Do not use pressurized air for agitation
gcpat.com | North America Customer Service: 1 877-4AD-MIX1 (1 877-423-6491)
We hope the information here will be helpful. It is based on data and knowledge considered to be true and accurate, and is offered for consideration, investigation and verification by the user, but we donot warrant the results to be obtained. Please read all statements, recommendations, and suggestions in conjunction with our conditions of sale, which apply to all goods supplied by us. No statement,recommendation, or suggestion is intended for any use that would infringe any patent, copyright, or other third party right.
QUANTEC is a trademark, which may be registered in the United States and/or other countries, of GCP Applied Technologies Inc. This trademark list has been compiled using available published information as of the publication date and may not accurately reflect current trademark ownership or status.
© Copyright 2018 GCP Applied Technologies Inc. All rights reserved.
GCP Applied Technologies Inc., 62 Whittemore Avenue, Cambridge, MA 02140 USA.
In Canada, GCP Canada, Inc., 294 Clements Road, West, Ajax, Ontario, Canada L1S 3C6.
This document is only current as of the last updated date stated below and is valid only for use in the United States. It is important that you always refer to the currently available information at the URL below to provide the most current product information at the time of use. Additional literature such as Contractor Manuals, Technical Bulletins, Detail Drawings and detailing recommendations and other relevant documents are also available on www.gcpat.com. Information found on other websites must not be relied upon, as they may not be up-to-date or applicable to the conditions in your location and we do not accept any responsibility for their content. If there are any conflicts or if you need more information, please contact GCP Customer Service.
Last Updated: 2021-02-05