Overview
GCP liquid waterproofing products offer high performance with unique characteristics. The liquid waterproofing membrane is cold-applied and cures quickly, allowing job sites to quickly return to full operation.
Products and Accessories
Products
Fluid applied waterproofing
Liquid applied waterproofing
Cold applied waterproofing
Fluid applied waterproofing
Liquid applied waterproofing
Cold applied waterproofing
- Product Name
- Description
- Key Benefits
- Applications Type
Fluid applied waterproofing
Fluid applied waterproofing
PROCOR® is a two component, synthetic rubber, cold vulcanized fluid applied waterproofing membrane. Procor is formulated for application to external surfaces of structural concrete, masonry and other substrates needing waterproofing. It cures to form a resilient, monolithic, fully bonded elastomeric sheet.
- Fully bonded - water cannot track beneath the membrane
- Elastomeric - accommodates minor structural movements and will bridge concrete shrinkage cracks
- Asphalt free formulation - does not become brittle with age and remains flexible to -22 ºF (-30 ºC)
Fluid applied waterproofing
Fluid applied waterproofing
The PROCOR® Composite Waterproofing System combines PROCOR® 75 fluid-applied membrane with PROCOR® Composite Membrane to provide a durable, integrated composite waterproofing system for use in vertical and horizontal waterproofing applications.
Dual protection system
Cold-applied
Primerless
Flexible
Fully-adhered system
Drainage system
Warranty systems available
below ground structures and elevated decks, planters and inverted roofs against water and water vapor ingress
Fluid applied waterproofing
Liquid applied waterproofing
Fluid applied waterproofing
Liquid applied waterproofing
The PROCOR® Composite Waterproofing System combines PROCOR® 75 fluid-applied membrane with PROCOR® Composite Membrane to provide a durable, integrated composite waterproofing system for use in vertical and horizontal waterproofing applications.
- Dual protection system
- Cold-applied
- Primerless
- Flexible
- Below ground structures
- Elevated decks
- Planters
- Inverted roofs
Cold applied waterproofing
Fluid applied waterproofing
Liquid applied waterproofing
Cold applied waterproofing
Fluid applied waterproofing
Liquid applied waterproofing
The PROCOR® Deck System 3R is a reinforced, fully-bonded, elastomeric, asphalt-free, monolithic waterproofing system. The system is comprised of two layers of PROCOR® with an embedded layer of PROCOR® Reinforcing Mesh to provide extra strength and thickness control.
- Fully bonded
- Elastomeric
- Asphalt free formulation
- Chemical cure
- Inverted roofs
- Elevated plaza decks
- Green roofs above occupied spaces
Liquid applied waterproofing
SILCOR® 900HA liquid waterproofing is a two-component, hand-applied seamless liquid waterproofing that is typically foot-trafficable after two hours of application. SILCOR® 900HA forms a fully-bonded waterproof membrane that is extremely durable, offers excellent wear and chemical resistance* and has a high tolerance against mechanical damage.
- Fast cure
- Fully bonded
- Non-flammable
- Low odor
- Plaza decks
- Split slabs
- Green roofs
- Planters
- PRMA applications
Liquid applied waterproofing
SILCOR® 900MP waterproofing is a premium performance, two-component, spray-applied, seamless waterproofing membrane that cures within two minutes to form a high-strength, elastomeric, and fully-bonded waterproof membrane.
- Fast Cure –Accepts foot traffic after two minutes
- Seamless – Continuous waterproofing integrity
- Productivity – Spray-applied for maximum coverage per day
- Plaza decks
- Split slabs
- Green roofs
- Planters
- PRMA
Accessories
Liquid applied waterproofing
Waterproofing accessories
Liquid applied waterproofing
Waterproofing accessories
- Accessory Name
- Description
- Key Benefits
- Applications Type
Liquid applied waterproofing
Waterproofing accessories
Liquid applied waterproofing
Waterproofing accessories
SILCOR® Fast Set Primer is a two-component fast curing, short recoat time urethane primer for concrete substrates specifically designed for SILCOR® liquid waterproofing membranes.
- Fast curing with short recoat time : 20 minute recoat time at 70°F (21°C)
- Easy to apply by spray or roller or brush
- Convenient for large size jobs (10 gallon kit)
Liquid applied waterproofing
Waterproofing accessories
Liquid applied waterproofing
Waterproofing accessories
SILCOR® Primer EPF is a two-component fast curing, short recoat time epoxy primer for concrete substrates specifically designed for SILCOR® liquid waterproofing membranes.
- Can be placed over green concrete or 7 days cure concrete, when it is used with SILCOR® 900MP
- Fast curing with short recoat time
- Excellent adhesion exceeds concrete cohesive strength
Liquid applied waterproofing
Liquid applied waterproofing
SILCOR® Top Coat 70 is a two-component, UV protective coating, formulated specifically to protect SILCOR® waterproofing membranes in permanently exposed upturn and flashing applications.
- Prevents discoloration of SILCOR® membranes in upturn and flashing applications
- Color stable and UV resistant
- Frost and weather resistant
- Plaza decks
- Split slabs
- Green roofs
- Planters
- PRMA applications