DUCTILCRETE® WT100 is an engineered system for non-DOT concrete paving. The DUCTILCRETE® WT100 system provides a minimum 3-inch bonded topping on existing exterior asphalt or concrete pavement.
DUCTILCRETE® WT100 is recommended for the refurbishment of existing exterior asphalt and concrete non-DOT paving.
Typical end use applications:
- Parking lots
Remedial concrete paving designed and installed with DUCTILCRETE® WT100 will typically have the following advantages vs. conventional concrete paving:
- No requirement for removing existing concrete or asphalt
- No requirement for joint sealers
- Reduced long-term maintenance
- 3-year warranty provided by licensed contractor
DUCTILCRETE® WT100 is an engineered system comprising project-specific non-DOT paving designs, blends of proprietary liquid admixtures and synthetic fibers, and placement practices.
The DUCTILCRETE® liquid admixtures and DUCTILCRETE® fibers are delivered to the jobsite ready-to-use in accordance with manufacturer’s recommendation and design.
Specifications and Installation Guidance
Refer to the latest “STANDARD DUCTILCRETE® EXTERIOR PAVEMENT SPECIFICATION” for design and installation guidance which can be obtained from your local GCP representative.
The DUCTILCRETE® technology is covered by US Patent Nos. 7,968,178 and 9,828,768.
gcpat.com | North America Customer Service: 1 877-4AD-MIX1 (1 877-423-6491)
We hope the information here will be helpful. It is based on data and knowledge considered to be true and accurate, and is offered for consideration, investigation and verification by the user, but we do not warrant the results to be obtained. Please read all statements, recommendations, and suggestions in conjunction with our conditions of sale, which apply to all goods supplied by us. No statement, recommendation, or suggestion is intended for any use that would infringe any patent, copyright, or other third party right.
DUCTILCRETE is a trademark, which may be registered in the United States and/or other countries, of GCP Applied Technologies Inc. This trademark list has been compiled using available published information as of the publication date and may not accurately reflect current trademark ownership or status.
© Copyright 2018 GCP Applied Technologies Inc. All rights reserved.
GCP Applied Technologies Inc., 62 Whittemore Avenue, Cambridge, MA 02140 USA.
This document is only current as of the last updated date stated below and is valid only for use in the United States. It is important that you always refer to the currently available information at the URL below to provide the most current product information at the time of use. Additional literature such as Contractor Manuals, Technical Bulletins, Detail Drawings and detailing recommendations and other relevant documents are also available on www.gcpat.com. Information found on other websites must not be relied upon, as they may not be up-to-date or applicable to the conditions in your location and we do not accept any responsibility for their content. If there are any conflicts or if you need more information, please contact GCP Customer Service.
Last Updated: 2019-12-16