PERM-A-BARRIER® Adhesive Primer Data Sheet

PDF Add

Contact an Air Barrier Specialist today

Product Description

PERM-A-BARRIER® Adhesive Primer imparts an aggressive, high tack finish on the treated substrate. It is specifically designed to facilitate tenacious adhesion of PERM-A-BARRIER® self-adhered membranes to various substrates including plywood, oriented strand board (OSB), concrete masonry units (CMU) and glass faced wall boards.

    Product Advantages

    • Excellent adhesion—bonds to substrate and remains permanently pressure sensitive
    • Aggressive tack—provides a tenacious bond to substrates such as plywood, OSB, CMU and glass faced wall boards
    • Fast drying—increased flexibility for application schedule
    • Fast and easy application—by brush or roller
    • Low temperature—can be applied at 20°F (-6°C)
    • VOC compliant—meets SCAQMD regulations

    Use

    PERM-A-BARRIER® Adhesive Primer can be used at 20°F (-6°C) or above.

    Availability

    PERM-A-BARRIER® Adhesive Primer is available in 5 gallon pails.

    Installation

    Safety, Storage and Handling Information

    PERM-A-BARRIER® Adhesive Primer is flammable in the wet state. Material Safety Data Sheets (MSDS) are available and users should acquaint themselves with this information. Carefully read detailed precaution statements on product labels and the MSDS before use.

    • The VOC (Volatile Organic Compound) content is 135 g/L EPA method 24.
    • Best storage temperature is 40–80°F (4–27°C). Lower temperatures can cause increased viscosity of a temporary nature. Rotate stock on a “first in, first out” basis.
    • When stored at recommended temperature in the original, unopened container, this product has a shelf life of 12 months from date of shipment.
    • Do not apply on EPS/XPS insulation board.
    • Use solvent resistant brushes and rollers.
    • Keep work area well ventilated. 
    • Low flash point product. To minimize risk of fire, implement best practices to use only one open container per area.
    • Keep away from open flame, sparks, and ignition sources.

    Surface Preparation

    All surfaces must be free from frost, dirt, grease, oil or other contaminants. Failure to remove excessive dust may result in compromised adhesion of the membrane to the building envelope.

    Application

    Apply PERM-A-BARRIER® Adhesive Primer in dry weather with ambient and substrate temperatures above 20°F (-6°C). Surface must be dry and clean. PERM-A-BARRIER® Adhesive Primer can be applied by brush or roller. Typical brushes and rollers designed for use with latex paints may be used. Only prime areas in which the membrane can be applied the same day. 

    Coverage

    Approximately 250–300 ft2/gal (23–28 m2/L) on glass-mat faced gypsum sheathing such as DensGlass® Gold. Coverage rates may vary depending on substrate type, brand and roughness. Lower coverage per gallon will result in lower permeability. Do not apply more than one coat. For technical assistance, please contact your local GCP Representative.

    Drying

    Allow PERM-A-BARRIER® Adhesive Primer to dry until surface becomes tacky. Drying times may vary depending on temperature and humidity conditions. The product is packaged “ready to use.” Do not use any substance to thin this product. Apply membrane after primer is dried but surface is still tacky. Do not over prime or do not apply multiple coats.

    Cleanup

    Wet PERM-A-BARRIER® Adhesive Primer may be removed using mineral spirits. For dry adhesive, citrus based cleaners may be used.

     

      gcpat.com | North America Customer Service: +1 (877) 423 6491

      We hope the information here will be helpful. It is based on data and knowledge considered to be true and accurate, and is offered for consideration, investigation and verification by the user, but we do not warrant the results to be obtained. Please read all statements, recommendations, and suggestions in conjunction with our conditions of sale, which apply to all goods supplied by us. No statement, recommendation, or suggestion is intended for any use that would infringe any patent, copyright, or other third party right.

      PERM-A-BARRIER is a trademark, which may be registered in the United States and/or other countries, of GCP Applied Technologies Inc. DensGlass Gold is a registered trademark of Georgia-Pacific Corporation. This trademark list has been compiled using available published information as of the publication date and may not accurately reflect current trademark ownership or status.

      © Copyright 2018 GCP Applied Technologies Inc. All rights reserved.


      GCP Applied Technologies Inc., 2325 Lakeview Parkway, Suite 400, Alpharetta, GA 30009, USA
      GCP Canada, Inc., 294 Clements Road, West, Ajax, Ontario, Canada L1S 3C6
      This document is only current as of the last updated date stated below and is valid only for use in the United States. It is important that you always refer to the currently available information at the URL below to provide the most current product information at the time of use. Additional literature such as Contractor Manuals, Technical Bulletins, Detail Drawings and detailing recommendations and other relevant documents are also available on www.gcpat.com. Information found on other websites must not be relied upon, as they may not be up-to-date or applicable to the conditions in your location and we do not accept any responsibility for their content. If there are any conflicts or if you need more information, please contact GCP Customer Service.

      Last Updated: 2024-06-21

      https://gcpat.com/en/solutions/products/perm-a-barrier-air-barrier-system/perm-a-barrier-adhesive-primer