Form Release Agent

Product Description

PIERI® RELEASE 844 is a semi-liquid, high performance visco-elastic form release agent that ensures high quality architectural surfaces. PIERI® RELEASE 844 will not stain concrete or affect adhesion of waterproofing or other coatings. Coverage: 5,000-10,000 ft2/gal (123-245 m2/L).


PIERI® RELEASE 844 is designed for use with intricate molds and forms; especially with no or low draft for release. It may be used with all types of forms, including plastic, rubber, latex and Styrofoam and is particularly useful with self-consolidating concrete (SCC) concrete applications.

Directions for Use

A thin coat of PIERI® RELEASE 844  should be applied to cold or hot forms using a rag, sponge, mop or low pressure pump sprayer before wiping. Care should be taken to not over-apply.

Packaging & Handling

PIERI® RELEASE 844 is available in 55 gallon (208 L) drums and 5 gallon (19 L) pails. PIERI® RELEASE 844 has a shelf life of one year from date of manufacture if stored in in a cool dry place, in its closed original container Keep away from all sources of heat, sparks or flame.

Physical Specifications

Specific Gravity: 0.80

Flash Point: 145°F (63°C)


Read SDS before use.

gcpat.com | North America Customer Service: 1 877-4AD-MIX1 (1 877-423-6491)

We hope the information here will be helpful. It is based on data and knowledge considered to be true and accurate, and is offered for consideration, investigation and verification by the user, but we donot warrant the results to be obtained. Please read all statements, recommendations, and suggestions in conjunction with our conditions of sale, which apply to all goods supplied by us. No statement, recommendation, or suggestion is intended for any use that would infringe any patent, copyright, or other third party right.

PIERI is a trademark, which may be registered in the United States and/or other countries, of GCP Applied Technologies Inc.This trademark list has been compiled using available published information as of the publication date and may not accurately reflect current trademark ownership or status.

© Copyright 2018 GCP Applied Technologies Inc. All rights reserved.

GCP Applied Technologies Inc., 62 Whittemore Avenue, Cambridge, MA 02140 USA.

In Canada, GCP Canada, Inc., 294 Clements Road, West, Ajax, Ontario, Canada L1S 3C6.

This document is only current as of the last updated date stated below and is valid only for use in the United States. It is important that you always refer to the currently available information at the URL below to provide the most current product information at the time of use. Additional literature such as Contractor Manuals, Technical Bulletins, Detail Drawings and detailing recommendations and other relevant documents are also available on www.gcpat.com. Information found on other websites must not be relied upon, as they may not be up-to-date or applicable to the conditions in your location and we do not accept any responsibility for their content. If there are any conflicts or if you need more information, please contact GCP Customer Service.

Last Updated: 2018-11-29