OPTEC® EC-130 admixture is specifically formulated to enhance the overall appearance and physical properties of concrete paving stones and segmental retaining wall (SRW) units.OPTEC® EC - 130 is formulated as a ready-to-use admixture to aid the zero-slump manufacturing process. It provides color enhancement and efflorescence control to manufactured concrete products. OPTEC® EC-130 provides a medium swipe on the surface of the unit.
OPTEC® EC-130 admixture is specifically designed for the efficient production of hardscape concrete products like segmental retaining wall units and concrete paving stones.
- Improves cement and pigment dispersion
- Enhances color
- Minimizes efflorescence
- Lowers absorption
- Improves machinability
OPTEC® EC-130 admixture reacts with the hydrating cement inhibiting the formation of excessive water-soluble salts that are known to cause unsightly efflorescence on the surface of the concrete product. OPTEC® EC-130 also plasticizes the mixture aiding the manufacturing process.
OPTEC® EC-130 admixture is generally used at a rate of 6–9 oz/ cwt (390–590 mL/100 kg) of cementitious materials including fly ash and other pozzolans. The addition rate is dependent upon the specific materials used and the desired end properties.
OPTEC® EC-130 should be added separately to the mix after the cement has been wetted and before or with the addition of the final mix water. Once OPTEC® EC-130 is added, it should be mixed for a minimum of one minute, but preferably two minutes.
Mix times of less than one minute should be avoided. Never add OPTEC® EC-130 to dry cement.
OPTEC® EC-130 is compatible with other GCP admixtures. When multiple admixtures are used however, they must be added separately to the concrete mixture. Variables such as cementitious content, aggregate gradations, processing equipment, and curing conditions may have an impact on the effectiveness of OPTEC® EC-130. Testing with local materials and production equipment is necessary to determine the end results. Consult your GCP representative for more information.
OPTEC® EC-130 can be dispensed using conventional air diaphragm pump systems. For further information contact your GCP representative.
OPTEC® EC-130 is available in drums, returnable totes and in bulk. OPTEC® EC-130 weighs approximately 8.2 lbs/gallon (3.7 kg/L).
Health & Safety
All precautions defined on the SDS (Safety Data Sheet) for OPTEC® EC-130 must be followed.
OPTEC® EC-130 must be protected from freezing at temperatures of 32 oF (0 oC) and below, as the admixture is not usable once frozen. OPTEC® EC-130 has a shelf life of approximately six months from the date of manufacture, but it may last longer if stored in unopened containers.
gcpat.com | North America Customer Service: 1 877-4AD-MIX1 (1 877-423-6491)
We hope the information here will be helpful. It is based on data and knowledge considered to be true and accurate, and is offered for consideration, investigation and verification by the user, but we do not warrant the results to be obtained. Please read all statements, recommendations, and suggestions in conjunction with our conditions of sale, which apply to all goods supplied by us. No statement, recommendation, or suggestion is intended for any use that would infringe any patent, copyright, or other third party right.
OPTEC is a trademark, which may be registered in the United States and/or other countries, of GCP Applied Technologies Inc. This trademark list has been compiled using available published information as of the publication date and may not accurately reflect current trademark ownership or status.
© Copyright 2018 GCP Applied Technologies Inc. All rights reserved.
GCP Applied Technologies Inc., 62 Whittemore Avenue, Cambridge, MA 02140 USA.
In Canada, 294 Clements Road, West, Ajax, Ontario, Canada L1S 3C6.
This document is only current as of the last updated date stated below and is valid only for use in the United States. It is important that you always refer to the currently available information at the URL below to provide the most current product information at the time of use. Additional literature such as Contractor Manuals, Technical Bulletins, Detail Drawings and detailing recommendations and other relevant documents are also available on www.gcpat.com. Information found on other websites must not be relied upon, as they may not be up-to-date or applicable to the conditions in your location and we do not accept any responsibility for their content. If there are any conflicts or if you need more information, please contact GCP Customer Service.
Last Updated: 2018-11-29