DUCTILCRETE® HB100 is a patented dual-layer engineered system for concrete slabs based on the Heidebed® technology and method. It is specifically designed for tilt-up construction where the two layers are placed in separate pours. The entire bottom part of the slab can be installed quickly providing a surface for ongoing construction. The top layer is typically placed after the walls and roof have been installed, which allows for a superior slab finish, eliminating the need for repairs of the bottom course. The DUCTILCRETE® HB100 system results in high performance, flat concrete slabs with column line joint spacing, superior finish without the residual effects of tilt-up construction, increased load carrying capacity, and reduced maintenance while improving construction schedules when compared to traditional slab construction systems.
DUCTILCRETE® HB100 is recommended for the construction of new interior concrete slabs. Typical end use applications:
- E-commerce and distribution centers
- Manufacturing facilities
Concrete slabs designed and installed with DUCTILCRETE® HB100 will typically have the following advantages vs. conventional concrete slabs:
- Up to 75% contraction joint reduction
- Superior slab finish without the residual effects of tilt-up construction
- Reduced curling
- Reduced long-term maintenance
- 5-year warranty provided by licensed contractor
- Sustainable - approximately 15% less concrete is used
- Increased load capacity
- Elimination of wire mesh/rebar/steel fibers in the body of the slab
DUCTILCRETE® HB100 is an engineered system based on the patented Heidebed® technology and method comprising of project specific slab designs, blends of proprietary liquid admixtures and synthetic fibers, and placement practices.
The DUCTILCRETE® liquid admixtures and DUCTILCRETE® fibers are delivered to the jobsite ready-to-use in accordance with manufacturer’s recommendation and design.
Specifications and Installation Guidance
Refer to the latest DUCTILCRETE® “Standard Interior Floor Slab Specification” for design and installation guidance which can be obtained from your local GCP representative.
The Heidebed® technology is covered by US Patent Nos. 9,828,768 and 9,926,701.
gcpat.com | North America Customer Service: 1 877-4AD-MIX1 (1 877-423-6491)
We hope the information here will be helpful. It is based on data and knowledge considered to be true and accurate, and is offered for consideration, investigation and verification by the user, but we do not warrant the results to be obtained. Please read all statements, recommendations, and suggestions in conjunction with our conditions of sale, which apply to all goods supplied by us. No statement, recommendation, or suggestion is intended for any use that would infringe any patent, copyright, or other third party right.
DUCTILCRETE is a trademark, which may be registered in the United States and/or other countries, of GCP Applied Technologies Inc. This trademark list has been compiled using available published information as of the publication date and may not accurately reflect current trademark ownership or status.
© Copyright 2018 GCP Applied Technologies Inc. All rights reserved.
GCP Applied Technologies Inc., 62 Whittemore Avenue, Cambridge, MA 02140 USA.
This document is only current as of the last updated date stated below and is valid only for use in the United States. It is important that you always refer to the currently available information at the URL below to provide the most current product information at the time of use. Additional literature such as Contractor Manuals, Technical Bulletins, Detail Drawings and detailing recommendations and other relevant documents are also available on www.gcpat.com. Information found on other websites must not be relied upon, as they may not be up-to-date or applicable to the conditions in your location and we do not accept any responsibility for their content. If there are any conflicts or if you need more information, please contact GCP Customer Service.
Last Updated: 2018-11-29