DUCTILCRETE® FS100 is an engineered system for concrete slabs. The DUCTILCRETE® FS100 system is specifically designed for cold storage and freezer warehouse applications providing high performance, flat concrete slabs with column line joint spacing, increased load carrying capacity and reduced maintenance when compared to traditional slab construction systems.
DUCTILCRETE® FS100 is recommended for the construction of new interior concrete slabs. Typical end use applications:
- Cold storages
- Freezer warehouses
- Food service and manufacturing
Interior concrete slabs designed and installed with DUCTILCRETE® FS100 will typically have the following advantages vs. conventional concrete slabs:
- Up to 75% contraction joint reduction
- Reduced curling
- Reduced long-term maintenance
- 5-year warranty provided by licensed contractor
- Sustainable – on average approximately 15% less concrete is used
- Increased load carrying capacity
- Elimination of wire mesh/rebar/steel fibers in the body of the slab
DUCTILCRETE® FS100 is an engineered system comprising of project specific slab designs, blends of proprietary liquid admixtures and synthetic fibers, and placement practices.
The DUCTILCRETE® liquid admixtures and DUCTILCRETE® fibers are delivered ready-to-use to the jobsite and shall be used in strict accordance with manufacturer’s recommendations and design.
Specifications and Installation Guidance
Refer to the latest DUCTILCRETE® “Standard Interior Floor Slab Specification” for design and installation guidance which can be obtained from your local GCP representative.
The Ductilcrete® technology is covered by US Patent Nos. 7,968,178 and 9,828,768.
gcpat.com | North America Customer Service: 1 877-4AD-MIX1 (1 877-423-6491)
We hope the information here will be helpful. It is based on data and knowledge considered to be true and accurate, and is offered for consideration, investigation and verification by the user, but we do not warrant the results to be obtained. Please read all statements, recommendations, and suggestions in conjunction with our conditions of sale, which apply to all goods supplied by us. No statement, recommendation, or suggestion is intended for any use that would infringe any patent, copyright, or other third party right.
DUCTILCRETE is a trademark, which may be registered in the United States and/or other countries, of GCP Applied Technologies Inc. This trademark list has been compiled using available published information as of the publication date and may not accurately reflect current trademark ownership or status.
© Copyright 2018 GCP Applied Technologies Inc. All rights reserved.
GCP Applied Technologies Inc., 62 Whittemore Avenue, Cambridge, MA 02140 USA.
This document is only current as of the last updated date stated below and is valid only for use in the United States. It is important that you always refer to the currently available information at the URL below to provide the most current product information at the time of use. Additional literature such as Contractor Manuals, Technical Bulletins, Detail Drawings and detailing recommendations and other relevant documents are also available on www.gcpat.com. Information found on other websites must not be relied upon, as they may not be up-to-date or applicable to the conditions in your location and we do not accept any responsibility for their content. If there are any conflicts or if you need more information, please contact GCP Customer Service.
Last Updated: 2018-11-29