DUCTILCRETE® SHL 20 Surface Hardener
High-performance Lithium Silicate Sealer, Densifier and Dustproofer for concrete.
DUCTILCRETE® SHL 20 surface hardener is a high-performance liquid lithium silicate sealer/ densifier for concrete surfaces. DUCTILCRETE® SHL 20 surface hardener penetrates and reacts with cured concrete, producing calcium silicate hydrate within the concrete pores. Treated surfaces will remain breathable while reducing porosity, dusting, and water permeability and increasing abrasion resistance.
DUCTILCRETE® SHL 20 surface hardener protects the concrete from deterioration, and is specially formulated for residential, commercial and industrial concrete floors like:
- Warehouses and manufacturing plants.
- Distribution centers.
- Parking decks - garages.
- Retail stores and shopping malls.
- Healthcare and hospitals.
- Commercial offices.
- Institutional buildings
- Residential buildings.
- Enhance overall surface durability.
- Improves abrasion resistance, light reflectance and gloss.
- Easy and low maintenance application.
- Reduce dusting, porosity and water permeability.
- When properly applied, will not leave the whitish blush characteristic of sodium silicate sealers.
- Does not contribute to Alkali Silica Reaction (ASR).
- Can be used interior and exterior.
- Fast curing. Ready for traffic in one hour for most floors.
- Apply on new or existing concrete.
- DUCTILCRETE® SHL 20 surface hardener may be applied on freshly placed concrete after the final finishing and to existing (cured) concrete.
- Always apply DUCTILCRETE® SHL 20 surface hardener to a clean concrete surface free of dust, laitance, curing agents, impregnation, coatings bond breakers, oil, dirt, grease or debris that will reduce penetration.
For freshly placed concrete
- May be applied immediately after finishing or after joints have been cut.
- After final finishing, or cutting of joints, apply a single coat of DUCTILCRETE® SHL 20 surface hardener with a quality low pressure sprayer.
- Uniformly spread the DUCTILCRETE® SHL 20 surface hardener with a soft broom or microfiber applicator to thoroughly coat the concrete eliminating any puddles or excess. Apply enough material to keep the surface wet for 15-20 minutes.
- Apply additional DUCTILCRETE® SHL 20 surface hardener to porous areas that dry quickly.
- Any excess DUCTILCRETE® SHL 20 surface hardener that dries on the surface will appear as a dry powder residue and can be removed with a stiff broom, power sweeper, or floor scrubbing machine.
- An ASTM C309 compliant curing compound may be applied.
For existing concrete
- Clean surface to remove any dirt, laitance, curing compounds or coatings that may prevent DUCTILCRETE® SHL 20 surface hardener from penetrating the surface.
- Apply the DUCTILCRETE® SHL 20 surface hardener with a quality low pressure sprayer, in a single saturating coat.
- Uniformly spread the DUCTILCRETE® SHL 20 surface hardener with a soft broom or microfiber applicator to thoroughly coat the concrete eliminating any puddles or excess.
- Apply enough material to keep the surface wet for 15-20 minutes. Apply additional the DUCTILCRETE® SHL 20 surface hardener to porous areas that dry quickly.
- Let treated areas dry. Remove any dried powdery residue with a stiff broom or floor scrubbing machine.
- Treated concrete surfaces with DUCTILCRETE® SHL 20 surface hardener will increase in hardness, durability and shine over time and regular maintenance.
- To enhance the surface sheen, buff or burnish the dry concrete surface with an orbital floor machine or high-speed propane burnishing machine in both directions with a black, then red floor cleaning pad.
- An additional gloss can be achieved on treated concrete surfaces by burnishing with a diamond-impregnated 800 grit or hogs hair pads on a high-speed machine. Please consult a professional applicator for this type of procedure.
Coverage rates will vary with concrete porosity.
|Fresh, Uncured, Burnished Concrete||800-1000 ft2 / gal|
|Existing Steel Troweled Concrete||400-500 ft2 / gal|
|Existing Float Finished Concrete||250-350 ft2 / gal|
|VOC Content||0 g/l|
|Dry time||1 to 2 hours.|
|Shelf life||2 years from date of manufacture (in the original tightly closed containers)|
USDA Accepted for Indirect Food Contact
Packaging & Storage
55 gallon plastic Drums.
5 gallon plastic pails.
As every project and application can vary, it is the contractor’s responsibility of determining compatibility by performing field test simulating actual jobsite conditions.
Do not use acidic or citrus based cleaners. Although DUCTILCRETE® SHL 20 surface hardener will improve the ability of the treated surface to resist liquid penetration and staining, spills should be cleaned up quickly to minimize any damage.
Applied by a professional applicator.
Health and Safety
Read and understand the product label and Safety Data Sheet (SDS) for each system component. All users should acquaint themselves with this information prior to working with the products and follow the precautionary statements.
SDSs can be obtained by contacting your local GCP representative or office, by calling GCP and in some cases from our web site at gcpat.com.
gcpat.com | North America Customer Service: 1 877-4AD-MIX1 (1 877-423-6491)
We hope the information here will be helpful. It is based on data and knowledge considered to be true and accurate, and is offered for consideration, investigation and verification by the user, but we do not warrant the results to be obtained. Please read all statements, recommendations, and suggestions in conjunction with our conditions of sale, which apply to all goods supplied by us. No statement, recommendation, or suggestion is intended for any use that would infringe any patent, copyright, or other third party right.
DUCTILCRETE is a trademark, which may be registered in the United States and/or other countries, of GCP Applied Technologies Inc. This trademark list has been compiled using available published information as of the publication date and may not accurately reflect current trademark ownership or status.
© Copyright 2020 GCP Applied Technologies Inc. All rights reserved.
GCP Applied Technologies Inc., 62 Whittemore Avenue, Cambridge, MA 02140 USA.
This document is only current as of the last updated date stated below and is valid only for use in the United States. It is important that you always refer to the currently available information at the URL below to provide the most current product information at the time of use. Additional literature such as Contractor Manuals, Technical Bulletins, Detail Drawings and detailing recommendations and other relevant documents are also available on www.gcpat.com. Information found on other websites must not be relied upon, as they may not be up-to-date or applicable to the conditions in your location and we do not accept any responsibility for their content. If there are any conflicts or if you need more information, please contact GCP Customer Service.
Last Updated: 2020-07-28