Water reducing and mid-range water reducing admixture ASTM C494 Type A and Type F
CLARENA® MC2000 is a patented mid-range water reducing admixture. It is manufactured under rigorous quality control to ensure uniform, predictable performance. The product does not contain added calcium chloride, weighs approximately 8.7 lbs/gal (1.04 kg/L), and meets the requirements of ASTM C494 Type A and F.
CLARENA® MC2000 is a proprietary aqueous formulation incorporating polycarboxylate and highly purified specialty organic chemicals especially designed to deliver superior and predictable water reduction over a wide range of aggregate clay contents. The superior dispersion capability produces concrete with significantly improved early and ultimate compressive strengths while maintaining near neutral set times.
- Linear water reduction
- Excellent slump retention
- Superior strength performance
- Neutral set times
- Superior workability and finishability
- Excellent plastic and hardened air control
- Excellent dose efficiency in presence of clays
CLARENA® MC2000 admixture is recommended for use with a wide range of concrete slumps where superior finishing characteristics are desired, particularly in commercial and residential flatwork and formed concrete applications.
The product may be used in a wide variety of applications, including ready mix, job site and concrete paving plants for normal and light-weight concrete and precast products.
CLARENA® MC2000 admixture offers significant advantages over conventional water reducers , especially in environments where a wide range of aggregate clays are present:
- Linear water reduction capability The neutral set capability of the product throughout a wide range of dosage rates allows the producer to have “peace of mind” by knowing they can utilize a single admixture to meet all their water reducer and admixture needs and requirements. The versatile water reduction capability may be used to produce high quality, workable concrete over a wide range of water/cement ratios.
- Superior strength performance The superior water reduction properties and excellent dispersion characteristics allow the production of lower water to cement ratio concrete, with more complete cement hydration. This combined effect results in increased compressive and flexural strengths at all ages.
- Superior workability and finishability The exceptional water reducing performance allows for concrete production at typically desired 3 to 8 in. (75 to 200 mm) slumps, providing smooth flowing concrete with improved placement properties. Floating and troweling, by machine or by hand, easily imparts a smooth, close tolerance surface with less machine time and labor.
- Excellent plastic and hardened air control Concretes treated with CLARENA® MC2000 admixture exhibit more reproducible AEA demand from batch-to-batch, small, predictable entrained air reduction over time.
- Excellent resistance to the effects of clays The polycarboxylates in CLARENA® MC2000 admixture are not readily absorbed by swellable clays, such as smectites, on the aggregates. This characteristic ensures predictable batch-to-batch water reduction, and a cost effective alternative to older sulfonated, and variable, natural products.
Addition rates may be varied to achieve the desired water reduction and set time. Typically, addition rates can vary from 2–15 fl oz /100 lbs (130–1000 mL/100 kg), but will typically range from 6-12 fl oz/100 lbs (390-780 mL/100 kg) of cementitious materials. Addition rates may vary depending on materials, job conditions and desired performance characteristics. Please consult your GCP Applied Technologies representative for information and assistance.
Compatibility with Other Admixtures and Batch Sequencing
CLARENA® MC2000 admixture is compatible with most GCP admixtures as long as they are added separately to the concrete mix, usually through the water holding tank discharge line. However it is not recommended for use in concrete containing naphthalene-based admixtures including DARACEM® 19. In general, it is recommended that the product be added to the concrete mix near the end of the batch sequence for optimum performance. Please see GCP Technical Bulletin TB-0110, Admixture Dispenser Discharge Line Location and Sequencing for Concrete Batching Operations for further recommendations. Different sequencing may be used if local testing shows better performance.
For concrete that requires air entrainment, the use of an ASTM C260 air-entraining agent (such as DARAVAIR® or DAREX® product lines) is recommended to provide suitable air void parameters for freeze-thaw resistance. Please consult your GCP Applied Technologies representative for guidance.
Packaging & Handling
CLARENA® MC2000 admixture is available in bulk, delivered by metered tank trucks, in totes, and in drums. The product will begin to freeze at approximately 25 °F (-4 °C) but will return to full strength after thawing and thorough agitation. In storage and for proper dispensing, the temperature should be maintained above 32 °F (0 °C).
A complete line of accurate, automatic dispensing equipment is available.
Review product label and Safety Data Sheet prior to use.
Concrete shall be designed in accordance with Standard Recommended Practice for Selecting Proportions for Concrete, ACI 211.
The mid-range water reducing admixture shall be CLARENA® MC2000 admixture as manufactured by GCP Applied Technologies, or its equivalent. It shall be manufactured to meet all the requirements of Specification for Chemical Admixtures for Concrete, ASTM Designation C494 as a Type A and Type F admixture.
The admixture shall be delivered as a ready-to-use, liquid product and shall not contain added calcium chloride. It shall be used in strict accordance with manufacturer’s recommendations.
gcpat.com | North America Customer Service: 1 877-4AD-MIX1 (1 877-423-6491)
This product or its use may be covered by US Patent Nos. 7,462,236; 8,187,376; 8,317,918; 9,546,110; 9,624,130; 10,266,449
We hope the information here will be helpful. It is based on data and knowledge considered to be true and accurate, and is offered for consideration, investigation and verification by the user, but we do
not warrant the results to be obtained. Please read all statements, recommendations, and suggestions in conjunction with our conditions of sale, which apply to all goods supplied by us. No statement,
recommendation, or suggestion is intended for any use that would infringe any patent, copyright, or other third party right.
GCP, GCP APPLIED TECHNOLOGIES, CLARENA, DARACEM, DARAVAIR and DAREX are trademarks, which may be registered in the United States and/or other countries, of GCP Applied Technologies Inc. This trademark list has been compiled using available published information as of the publication date and may not accurately reflect current trademark ownership or status.
© Copyright 2018 GCP Applied Technologies Inc. All rights reserved.
GCP Applied Technologies Inc., 62 Whittemore Avenue, Cambridge, MA 02140 USA.
In Canada, 294 Clements Road, West, Ajax, Ontario, Canada L1S 3C6.
This document is only current as of the last updated date stated below and is valid only for use in the United States. It is important that you always refer to the currently available information at the URL below to provide the most current product information at the time of use. Additional literature such as Contractor Manuals, Technical Bulletins, Detail Drawings and detailing recommendations and other relevant documents are also available on www.gcpat.com. Information found on other websites must not be relied upon, as they may not be up-to-date or applicable to the conditions in your location and we do not accept any responsibility for their content. If there are any conflicts or if you need more information, please contact GCP Customer Service.
Last Updated: 2022-01-04