Gatwick Airport cuts project time with SILCOR® liquid waterproofing

Gatwick Airport construction was completed on time and within specifications. SILCOR® liquid waterproofing

Project
Gatwick North Terminal
Client
Gatwick Airport Ltd
Architect
Capita Aviation
Contractor
Morgan Sindall PLC
Waterproofing Applicator
Structural Membranes Specialists Ltd
GCP Solution
SILCOR® liquid waterproofing

Project

New construction expands airport capacity

This £40m extension of the North Terminal at Gatwick Airport included refurbishment of the terminal’s primary passenger entrance.

The 8,300 m2 airport construction extension resulted in all British Airways passengers flying from Gatwick to be processed through the North Terminal.

"This £40m extension of the North Terminal at Gatwick Airport included refurbishment of the terminal’s primary passenger entrance."

Airport expansion has stringent waterproofing specs

The main airport construction challenges were to install a waterproofing system that met all contractor program requirements for speed of installation, return to site access, and damage resistance. 

Morgan Sindall PLC, the principal contractor, required a waterproofing product that could be applied quickly, trafficked immediately after application, and that would simplify detailing at terminations and penetrations.

The membrane also needed to be highly damage resistant. On the day after the membrane was installed, MEWP’sand a similar site plant had to traffic the membrane, with minimal additional protection measures, prior to installation of the glazed facades.

The project also required non-standard details for waterproofing penetrations and terminations, which were critical for the airport construction.

"Morgan Sindall PLC, the principal contractor, required a waterproofing product that could be applied quickly, trafficked immediately after application, and that would simplify detailing at terminations and penetrations."

Waterproofing podium decks

The upper forecourt at the airport passenger entrance was upgraded with a strengthening screed, insulated, and then re-waterproofed with SILCOR®spray applied liquid waterproofing. SILCOR® is a rapid set polyurea, two component liquid waterproofing system with exceptional physical properties. The system has a BBA Certificate and a European Technical Approval (ETA).

SILCOR® waterproofing is uniquely suited to meeting the operational needs mentioned above when waterproofing podium decks. No leaks through the refurbished podium deck were reported during the airport construction program or since project completion.

BLUE360sm Product Performance Advantage.
Because every project, large or small, deserves the best level of protection.

"The upper forecourt at the airport passenger entrance was upgraded with a strengthening screed, insulated, and then re-waterproofed with SILCOR®spray applied liquid waterproofing."

gcpat.com | North America Customer Service: +1 (877) 423 6491


GCP Applied Technologies Inc., 2325 Lakeview Parkway, Suite 400, Alpharetta, GA 30009, USA
GCP Canada, Inc., 294 Clements Road, West, Ajax, Ontario, Canada L1S 3C6
This document is only current as of the last updated date stated below and is valid only for use in the United States. It is important that you always refer to the currently available information at the URL below to provide the most current product information at the time of use. Additional literature such as Contractor Manuals, Technical Bulletins, Detail Drawings and detailing recommendations and other relevant documents are also available on www.gcpat.com. Information found on other websites must not be relied upon, as they may not be up-to-date or applicable to the conditions in your location and we do not accept any responsibility for their content. If there are any conflicts or if you need more information, please contact GCP Customer Service.

Last Updated: 2023-04-25

https://gcpat.com/en/about/project-profiles/gatwick-airport-cuts-project-time-silcor-liquid-waterproofing