FLORPRUFE® Bonded Vapor Barrier

Most flooring and finishes are sensitive to moisture—they will stain, warp, or become moldy if not kept dry. For on-grade construction, the American Concrete Institute recommends that a concrete slab should have a vapor barrier underneath it if there’s a moisture-sensitive covering on top. A high-performance vapor barrier will adhere to concrete as closely as possible—and FLORPRUFE®  is the only system that uses Advanced Bond Technology™.

SUBMITTAL PACKAGES

When concrete is poured over the FLORPRUFE® vapor barrier, it reacts with the barrier’s non-tacky adhesive coating. The adhesive forms a permanent integral seal with the concrete itself. Not only does this prevent water from infiltrating the underside of the slab, it also prevents the barrier from losing contact with the slab due to settling. Loose-laid systems can’t approach the performance of the fully-bonded GCP system, which offers long-lasting performance for critical areas and sensitive applications.

In addition to providing a nearly impermeable seal against vapor, FLORPRUFE® is designed to make life easier for contractors. A simple kick-out design lets builders install the barrier with the smallest possible team. In the meantime, workers can easily form laps using either mechanical fasteners or PREPRUFE® tape. A sturdy polyolefin backing resists both job-site conditions and moisture infiltration. All in all, workers can achieve a waterproofing solution that vastly exceeds industry standards for slab-on-grade concrete without putting in any additional effort or expense.