Injection Materials
Sign In

Construction Products

     
Quick Links

​​​​​​​​​​​​​Injection Materials

 

De Neef Product Pail

Grace offers chemical grouts, specialty injection resins and over 40 years of technical experience in their use. For the civil market this includes polyurethane grouting products (also called PU grouts) and acrylate resins for leak remediation, curtain wall grouting, slab stabilization and slab lifting.  Grout contractors can approach these problems through either injection or soak and place methods. In the municipal market Grace offers chemical grouting products for the grouting of mainline and lateral sewers, manhole remediation and repairs to storm pipes, box culverts and water tanks. These chemical grouting solutions can be applied with remote packers, by dill and place methods or by direct injection into soils. To serve the geotech market there are a wide range of rigid polyurethane chemical grouts, acrylate gels, and microfine cements to solve soil improvement issues, groundwater remediation problems and support of excavation challenges. A grouting contractor who uses down-hole packers, strainer pipes, or through wall installation techniques will find Grace's De Neef® grouts versatile and effective.

For tunnels and dams, Grace offers a wide range of De Neef products for specialty applications such as TBM pre-grouting, rock stabilization, void filling, and groundwater control. Whether the grouting contractor is looking for a groundwater controlling gel, a soil stabilizing microfine cement or a two component polyurethane grout, DeNeef grout is the solution. In addition to these leading edge technologies, Grace has the technical expertise to help the grout contractors apply these chemistries to the specific challenges of your project. It is this commitment to solving problems on every that sets the Grace technical specialists a step above the rest.

​​​​​​​​

 

 

AC-400https://gcpat.com/construction/en-ca/injection-materials/AC-400AC-400AC-400 Chemical Grout is an acrylamide free acrylate monomer system sealant designed, for water control during
Aqua Titehttps://gcpat.com/construction/en-ca/injection-materials/Aqua-TiteAqua TiteAqua-Tite is a fast reacting two-component polyurethane foam formulated to expand up to 6 times its original volume.
DeNeef CFL PURehttps://gcpat.com/construction/en-ca/injection-materials/DeNeef-CFL-PUReDeNeef CFL PUReCFL PURe is a hydrophobic polyurethane designed for void filling and barrier wall grouting. Depending on the
DeNeef Cut PURehttps://gcpat.com/construction/en-ca/injection-materials/DeNeef-Cut-PUReDeNeef Cut PUReCut PURe is a hydrophobic polyurethane designed to fill large voids in rock fissures, gravel layers, joints, and cracks
DeNeef Flex LV PURehttps://gcpat.com/construction/en-ca/injection-materials/DeNeef-Flex-LV-PUReDeNeef Flex LV PUReFlex LV PURe is a hydrophobic polyurethane designed to form a flexible gasket when injected into cracks and joints in
DeNeef Flex SLV PURehttps://gcpat.com/construction/en-ca/injection-materials/DeNeef-Flex-SLV-PUReDeNeef Flex SLV PUReFlex SLV PURe is an ultra low viscosity hydrophobic polyurethane designed to be injected into hairline cracks in
DeNeef Sealfoam PURehttps://gcpat.com/construction/en-ca/injection-materials/DeNeef-Sealfoam-PUReDeNeef Sealfoam PUReSealfoam PURe is a single component, low viscosity, hydrophilic MDI based polyurethane resin. Sealfoam PURe is TDI and
DeNeef Soil PURehttps://gcpat.com/construction/en-ca/injection-materials/DeNeef-Soil-PUReDeNeef Soil PUReSoil PURe is a hydrophobic polyurethane that, when used alone or with Soil Cat PURe, is designed to increase the
Denefoam 200https://gcpat.com/construction/en-ca/injection-materials/Denefoam-200Denefoam 200Denefoam 200 is HCFC Blown spray foam sealant that can be used to seal and fill voids. It is supplied in ready to use
Denelift 400https://gcpat.com/construction/en-ca/injection-materials/Denelift-400Denelift 400Dene-Lift 400 is a two component rigid polyurethane system for injection and pour foam applications. This foam has low
Denepox I-40https://gcpat.com/construction/en-ca/injection-materials/Denepox-I-40Denepox I-40Denepox I-40 is an ultra low viscosity, 100% solids, two component, moisture insensitive epoxy injection resin system
Deneseal 2235https://gcpat.com/construction/en-ca/injection-materials/Deneseal-2235Deneseal 2235DeneSeal-P-2235 is a high performance; NSF approved chemical resistant elastomeric joint sealant. Due to its high
Floatation Foamhttps://gcpat.com/construction/en-ca/injection-materials/Floatation-FoamFloatation FoamDeNeef Flotation Foam is a two component rigid polyurethane system designed for pour foam application requiring
Gelacrylhttps://gcpat.com/construction/en-ca/injection-materials/GelacrylGelacrylGelacryl is an acrylate polymer for injection into concrete structures and soils. Its low viscosity makes it ideal for
Gelacryl SRhttps://gcpat.com/construction/en-ca/injection-materials/Gelacryl-SRGelacryl SRGelacryl is an acrylate polymer for injection into concrete structures and soils. Its low viscosity makes it ideal for
Gelacryl Superflexhttps://gcpat.com/construction/en-ca/injection-materials/Gelacryl-SuperflexGelacryl SuperflexGelacryl Superflex is a unique blend of methacrylic acrylate copolymers that combines the low viscosity of traditional acrylate
Gelacryl Superflex ARhttps://gcpat.com/construction/en-ca/injection-materials/Gelacryl-Superflex-ARGelacryl Superflex ARGelacryl Superflex AR is a system composed of Gelacryl Superflex methacrylic acrylate copolymer resin and DeNeef Reinforcing Agent. This
Gelecryl SRhttps://gcpat.com/construction/en-ca/injection-materials/Gelecryl-SRGelecryl SRGelacryl SR Chemical Grout is an acrylamide free acrylate monomer system designed to stop infiltration in mainline and
HA Multigel NFhttps://gcpat.com/construction/en-ca/injection-materials/HA-Multigel-NFHA Multigel NFHA Multigel NF is a hydrophilic polyurethane designed to react with water and form a water impermeable gel mass. HA
INJECTO®https://gcpat.com/construction/en-ca/injection-materials/INJECTOINJECTO®INJECTO® hose is an injectable waterstop system that provides a conduit for the placement of DeNeef chemical grouts. The ½”